Shaking Table For Chromite Ore Processing Plant

Model No.:(L-S)6S

Packaging: Container Loading

Productivity: 30-700 m3/h

Brand: Mingyuan

Transportation: Ocean

Place of Origin: Henan, China

Supply Ability: 20 Sets per month

Certificate: CE, ISO

HS Code: 8474100000

Port: Qingdao Port,Tianjin Port,Shanghai

6S shaking talbe is the most commonly used model of the shaking table, it has various names according to the ore, such as it can be called gold shaking table if it's used for gold ore processing, it's called tin shaking table if it's used for tin ore, antimony shaking table for antimony ore, hematite shaking table for hematite, mananese shaking table for manganese ore. it's a Gravity Separator that separates the ore from its tailing by gravity difference. after the ore grinded, the ore is liberated from its gangue, the 6S shaking table requires the feeding concentration is within 15-30%, which can make the separation with good effect. when the slurry within the required concentrtion feeds to the 6S shaking table, and there is water pipes for clean water flushing, the tailing usually is light, moves faster than the ore, so the tailing is discharged from the further end, while the ore is discharged from the near end. a complete 6S shaking table mainly consists of the gearbox, motor, deck, water chute and the support frame.

2. Application of 6S Shaking Table /Gold shaking table
Shaking table widely uses in ores such as tungsten, tin, lead, zinc, gold, silver, tantalum, niobium, monacite, zircon, ilmenite planting the fissure filling or the placer Ore Dressing Plant in processes the 3-0.019mm granularity ore in the rough sizing and the selection work.

3. Working principle of 6S Shaking Table /Gold Shaking Table
The table is shaken back and forth longitudinally, using a slow forward stroke and a rapid return strike that causes particles to raw along the deck parallel to the direction of motion. The lighter materials move up and over the riffles and down to exit on the tailings side of the table. Wash water is fed at the top of the table at right angles to the direction of table movement. These forces combine to move particles diagonally across the deck from the feed end and they separate out on the table according to size and density. Tables are most commonly used to recover gold from hard rock ores, but can also be used to recover other mineral materials of higher than normal density. They do an excellent job of recovering small gold particles, even with a fairly high feed rate.

4. Technical Parameters of 6S Shaking Table /Gold Shaking Table

Looking for ideal Gold Shaking Table Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 6S Shaking Table are quality guaranteed. We are China Origin Factory of Shaking Table. If you have any question, please feel free to contact us.

Product Categories : Beneficiation Equipment > Mineral Separator